Be the bridge from science to solution. Be Bayer.
Descripción del puesto
En Bayer, creemos que el trabajo debe tener un propósito. Cada día, nuestros equipos avanzan hacia un futuro en el que "Salud para todos, hambre para nadie" esté al alcance, y cada función, desde el laboratorio hasta el campo y la sala de juntas, nos ayuda a lograrlo. Damos a las personas autonomía para influir en los resultados, apoyo para crecer mediante nuevas habilidades y experiencias, y una comunidad global donde se valoran las distintas perspectivas. Si quiere que su trabajo cuente y disponer del espacio necesario para desarrollar todo su potencial, aquí lo encontrará.
Estamos cambiando nuestra forma de trabajar en Bayer para lograr una mayor productividad, una innovación más rápida y mejores resultados. Lo llamamos Dynamic Shared Ownership (DSO), un modelo de responsabilidad compartida dinámica. Obtenga más información sobre lo que DSO supondrá para usted en su nuevo puesto aquí https://www.bayer.com/en/strategy/strategy
Utility Engineering Lead
Central Utilities Building / Wastewater Treatment / Incinerator
PURPOSE
The Utility Engineering Lead is accountable for engineering, commissioning, applicable qualification, performance verification, and technical start-up of the Central Utilities Building (CUB), wastewater-treatment plant, and incinerator.
Reporting to the Project Manager — CUB / Incinerator / Wastewater Treatment, the role leads the assigned Utility Engineers and coordinates control-engineering, supplier, and commissioning resources from requirements definition through design, procurement, installation, testing, and operational handover.
The role owns the technical integrity and integration of utility and environmental systems, ensuring they are delivered in a safe, documented, tested, and operationally ready state to support campus commissioning and manufacturing start-up.
This position will ultimately be based in New Albany, OH. Initially, however, significant travel to the design firms will be required until the design and construction teams transition onsite, anticipated for mid- to late summer 2027. Some remote work will also be necessary until an onsite office is established, potentially as early as March 2027.
We would prefer candidates to be currently residing in the Eastern and Midwestern sections of the United States. Relocation is available.
YOUR TASKS AND RESPONSIBILITIES
Scope
- CUB utility generation, storage, treatment, and distribution, including steam, heating and cooling, compressed air, gases, and water systems within the assigned scope;
- Clean or process utilities where allocated to the CUB scope, including defined interfaces with manufacturing facilities;
- Wastewater collection, segregation, equalization, treatment, chemical dosing, sludge handling, monitoring, and discharge systems, as applicable;
- Incinerator waste-feed systems, combustion equipment, fuel supply, emissions controls, monitoring, and residue-handling systems;
- Associated equipment, piping, instrumentation, controls, electrical interfaces, and supporting building services;
- Utility-demand and waste-load assessments, design criteria, equipment specifications, operating requirements, and system interfaces;
- Integrated commissioning, applicable qualification, environmental-performance testing, start-up, and handover;
- Assigned engineering, commissioning, qualification, and start-up budgets and resources.
Technical Ownership and Design Integration
- Own the integrated design basis, including utility demands, waste characteristics, capacity, operating ranges, reliability, redundancy, and future-expansion requirements;
- Consolidate requirements from API, DP, laboratories, warehouse, Facilities, Manufacturing, Quality, and EHS;
- Direct engineering partners in developing balances, PFDs, P&IDs, equipment specifications, layouts, and control requirements;
- Establish system ownership, battery limits, deliverables, decision rights, and interfaces across assigned Utility Engineers;
- Resolve technical configuration decisions and ensure designs support safe operation, maintainability, monitoring, and lifecycle performance;
- Coordinate electrical, automation, civil, mechanical, and manufacturing interfaces with the responsible discipline leads.
Equipment Procurement and Delivery
- Own technical delivery of assigned utility and treatment equipment from requirements through fabrication, testing, installation, and handover;
- Lead technical bid evaluations, supplier-selection recommendations, design reviews, and vendor-document acceptance within delegated authority;
- Establish factory acceptance testing (FAT) and site acceptance testing (SAT) strategies, test coverage, and acceptance criteria;
- Direct supplier issue resolution, deficiency closure, retesting, and documentation completion;
- Ensure technical changes are assessed for safety, quality, environmental, capacity, cost, and schedule impacts.
Commissioning, Qualification, and Performance Testing
- Own the integrated commissioning and qualification (C&Q) strategy for the assigned scope;
- Coordinate system classification with Quality and Validation and define the appropriate commissioning, qualification, and performance-verification requirements;
- Establish turnover sequencing, prerequisites, system boundaries, test plans, resources, and completion milestones;
- Direct preparation, execution, and closeout of commissioning procedures, applicable qualification protocols, and performance-test reports;
- Ensure testing addresses capacity, turndown, control sequences, alarms, interlocks, duty/standby operation, failure response, and recovery;
- Coordinate wastewater and incinerator performance demonstrations against approved treatment, emissions, discharge, and operating criteria;
- Own technical resolution of deficiencies and deviations and deliver complete acceptance packages.
Start-Up and Campus Readiness
- Own the integrated technical start-up plan, including utility availability, treatment readiness, supplier support, resources, and contingency arrangements;
- Align utility and environmental-system readiness with manufacturing commissioning and start-up milestones;
- Lead readiness reviews and coordinate safe energization, utility introduction, fuel introduction, and waste-feed introduction through approved authorization processes;
- Lead troubleshooting, performance verification, and stabilization of utility and treatment systems;
- Assess the implications of infrastructure delays or operating restrictions and recommend mitigation measures.
Safety, Environmental, and Operational Integration
- Coordinate with EHS and specialists to incorporate permit conditions, operating restrictions, monitoring obligations, and safeguards;
- Ensure process-safety and design-review actions are closed before relevant testing or start-up milestones;
- Verify readiness of operating procedures, training, maintenance and calibration plans, critical spares, and emergency arrangements;
- Complete technical handover, including as-built records, test documentation, operating limitations, residual risks, warranties, and outstanding obligations.
Team, Cost, and Schedule Leadership
- Lead assigned Utility Engineers and coordinate control-engineering and C&Q resources;
- Set priorities, allocate system ownership, review deliverables, and develop team capability;
- Own approved engineering and C&Q budgets within delegated authority, including forecasts, accrual inputs, cost-to-complete, and recovery actions;
- Monitor partner performance and correct technical-quality, productivity, resource, or delivery gaps;
- Maintain integrated technical risks, decisions, changes, and readiness reporting.
WHO YOU ARE
Bayer seeks an incumbent who possesses the following:
Required Qualifications
- Bachelor’s degree in Mechanical, Chemical, Environmental, Process Engineering, or a related discipline;
- Typically 10 or more years of relevant utility, industrial-treatment, or regulated-manufacturing engineering experience;
- Demonstrated leadership of engineering, commissioning, and start-up for major utility or environmental-infrastructure projects;
- Broad experience across central utilities and treatment systems, with demonstrated ability to lead specialist engineers;
- Strong understanding of equipment integration, utility reliability, process safety, environmental-performance requirements, and applicable GMP utility qualification;
- Proven multidisciplinary leadership, supplier management, troubleshooting, cost management, and communication skills;
- Fluent English required.
PREFERRED QUALIFICATIONS
- Bachelor’s degree in Mechanical, Chemical, Environmental, Process Engineering, or a related discipline; advanced degree preferred.
Employees can expect to be paid a salary between $131,600.00 to $197,400.00. Additional compensation may include a bonus or incentive compensation (if relevant). Additional benefits include health care, vision, dental, retirement, PTO, sick leave, etc..
This salary range is merely an estimate and may vary based on an applicant’s location, market data/ranges, an applicant’s skills and prior relevant experience, certain degrees and certifications, and other relevant factors.
This posting will be available for application until at least 11-16-26.
#LI
#LI-AMS
Bayer ofrece una amplia variedad de programas competitivos de compensación y beneficios. Si cumple los requisitos de esta oportunidad única y desea contribuir a nuestra misión «Salud para todos, hambre para nadie», le animamos a presentar su candidatura ahora. Forme parte de algo más grande. Sea usted mismo. Sea Bayer.
A todas las agencias de selección: Bayer no acepta currículos de terceros que no haya solicitado.
Bayer es una empresa que ofrece igualdad de oportunidades de empleo, incluidas las personas con discapacidad y los veteranos
Bayer se compromete a proporcionar acceso y ajustes razonables en su proceso de solicitud a las personas con discapacidad y anima a las personas candidatas con discapacidad a solicitar los ajustes que necesiten utilizando la información de contacto que figura a continuación.
Declaración de igualdad de oportunidades de empleo: Aviso para visitantes de Estados Unidos: Toda la información de este sitio está sujeta al cumplimiento de las normas y los reglamentos locales, que pueden variar con el tiempo y entre distintas zonas geográficas, incluidas, entre otras, las órdenes ejecutivas de Estados Unidos.
Bayer es una empresa participante en E-Verify.
Contáctenos:
Correo electrónico: hrop_usa@bayer.com
Benefits
Medical, Dental & Vision Coverage
Comprehensive health benefits including prescription coverage, telemedicine, mental health, and family care
Paid Time Off
30+ days of vacation and holidays per year
Retirement Planning
Top-tier 401K with up to 10% company contributions
Paid Parental Leave
Paid time off for the adoption, birth, or placement of a child
Employee Life Insurance
Life insurance coverage for employees, a spouse/domestic partner, and children
Employee Share Purchase Plan
Align your success with Bayer’s as a shareholder
Detalles del trabajo
Categoría
Engineering, Science & Technology
Fecha de publicación
Ubicación(es)
ID del puesto
JR10000309
Rango salarial