Skip to Main Content
  • Technical Engineering
  • Collaboration Management
  • Regulatory Compliance
  • Cross-Functional Collaboration
  • Process Optimization

Utilities Engineering Lead

オフィスのロビーでバイエルのロゴの前に立って微笑むバイエル従業員

Be the bridge from science to solution. Be Bayer.

業務内容

バイエルでは、仕事には意義があるべきだと考えています。私たちは日々、「Health for all, Hunger for none(すべての人に健康を、飢餓をゼロに)」という未来の実現を目指して取り組んでいます。研究室から現場、経営陣に至るまで、すべての役割がその未来の実現に貢献しています。バイエルでは、一人ひとりが責任を持って成果に貢献し、新しいスキルや経験を通じて成長できる環境、そして異なる視点を尊重するグローバルなコミュニティを提供しています。仕事を通じて意義ある成果を生み出し、自らの可能性を最大限に広げたいとお考えなら、バイエルにはそのための環境があります。


バイエルでは、より高い生産性、より速いイノベーション、より良い成果のために働き方を変革しています。私たちはこれをDynamic Shared Ownership(DSO)と呼んでいます。DSOがあなたにとってどういう意味を持つことになるのか、詳しくは以下をご覧ください: https://www.bayer.com/en/strategy/strategy


Utility Engineering Lead

Central Utilities Building / Wastewater Treatment / Incinerator 

PURPOSE

The Utility Engineering Lead is accountable for engineering, commissioning, applicable qualification, performance verification, and technical start-up of the Central Utilities Building (CUB), wastewater-treatment plant, and incinerator.

Reporting to the Project Manager — CUB / Incinerator / Wastewater Treatment, the role leads the assigned Utility Engineers and coordinates control-engineering, supplier, and commissioning resources from requirements definition through design, procurement, installation, testing, and operational handover.

The role owns the technical integrity and integration of utility and environmental systems, ensuring they are delivered in a safe, documented, tested, and operationally ready state to support campus commissioning and manufacturing start-up.

This position will ultimately be based in New Albany, OH. Initially, however, significant travel to the design firms will be required until the design and construction teams transition onsite, anticipated for mid- to late summer 2027. Some remote work will also be necessary until an onsite office is established, potentially as early as March 2027. 

We would prefer candidates to be currently residing in the Eastern and Midwestern sections of the United States. Relocation is available.

YOUR TASKS AND RESPONSIBILITIES

Scope

  • CUB utility generation, storage, treatment, and distribution, including steam, heating and cooling, compressed air, gases, and water systems within the assigned scope;
  • Clean or process utilities where allocated to the CUB scope, including defined interfaces with manufacturing facilities;
  • Wastewater collection, segregation, equalization, treatment, chemical dosing, sludge handling, monitoring, and discharge systems, as applicable;
  • Incinerator waste-feed systems, combustion equipment, fuel supply, emissions controls, monitoring, and residue-handling systems;
  • Associated equipment, piping, instrumentation, controls, electrical interfaces, and supporting building services;
  • Utility-demand and waste-load assessments, design criteria, equipment specifications, operating requirements, and system interfaces;
  • Integrated commissioning, applicable qualification, environmental-performance testing, start-up, and handover;
  • Assigned engineering, commissioning, qualification, and start-up budgets and resources.

Technical Ownership and Design Integration

  • Own the integrated design basis, including utility demands, waste characteristics, capacity, operating ranges, reliability, redundancy, and future-expansion requirements;
  • Consolidate requirements from API, DP, laboratories, warehouse, Facilities, Manufacturing, Quality, and EHS;
  • Direct engineering partners in developing balances, PFDs, P&IDs, equipment specifications, layouts, and control requirements;
  • Establish system ownership, battery limits, deliverables, decision rights, and interfaces across assigned Utility Engineers;
  • Resolve technical configuration decisions and ensure designs support safe operation, maintainability, monitoring, and lifecycle performance;
  • Coordinate electrical, automation, civil, mechanical, and manufacturing interfaces with the responsible discipline leads.

Equipment Procurement and Delivery

  • Own technical delivery of assigned utility and treatment equipment from requirements through fabrication, testing, installation, and handover;
  • Lead technical bid evaluations, supplier-selection recommendations, design reviews, and vendor-document acceptance within delegated authority;
  • Establish factory acceptance testing (FAT) and site acceptance testing (SAT) strategies, test coverage, and acceptance criteria;
  • Direct supplier issue resolution, deficiency closure, retesting, and documentation completion;
  • Ensure technical changes are assessed for safety, quality, environmental, capacity, cost, and schedule impacts.

Commissioning, Qualification, and Performance Testing

  • Own the integrated commissioning and qualification (C&Q) strategy for the assigned scope;
  • Coordinate system classification with Quality and Validation and define the appropriate commissioning, qualification, and performance-verification requirements;
  • Establish turnover sequencing, prerequisites, system boundaries, test plans, resources, and completion milestones;
  • Direct preparation, execution, and closeout of commissioning procedures, applicable qualification protocols, and performance-test reports;
  • Ensure testing addresses capacity, turndown, control sequences, alarms, interlocks, duty/standby operation, failure response, and recovery;
  • Coordinate wastewater and incinerator performance demonstrations against approved treatment, emissions, discharge, and operating criteria;
  • Own technical resolution of deficiencies and deviations and deliver complete acceptance packages.

Start-Up and Campus Readiness

  • Own the integrated technical start-up plan, including utility availability, treatment readiness, supplier support, resources, and contingency arrangements;
  • Align utility and environmental-system readiness with manufacturing commissioning and start-up milestones;
  • Lead readiness reviews and coordinate safe energization, utility introduction, fuel introduction, and waste-feed introduction through approved authorization processes;
  • Lead troubleshooting, performance verification, and stabilization of utility and treatment systems;
  • Assess the implications of infrastructure delays or operating restrictions and recommend mitigation measures.

Safety, Environmental, and Operational Integration

  • Coordinate with EHS and specialists to incorporate permit conditions, operating restrictions, monitoring obligations, and safeguards;
  • Ensure process-safety and design-review actions are closed before relevant testing or start-up milestones;
  • Verify readiness of operating procedures, training, maintenance and calibration plans, critical spares, and emergency arrangements;
  • Complete technical handover, including as-built records, test documentation, operating limitations, residual risks, warranties, and outstanding obligations.

Team, Cost, and Schedule Leadership

  • Lead assigned Utility Engineers and coordinate control-engineering and C&Q resources;
  • Set priorities, allocate system ownership, review deliverables, and develop team capability;
  • Own approved engineering and C&Q budgets within delegated authority, including forecasts, accrual inputs, cost-to-complete, and recovery actions;
  • Monitor partner performance and correct technical-quality, productivity, resource, or delivery gaps;
  • Maintain integrated technical risks, decisions, changes, and readiness reporting.

WHO YOU ARE

Bayer seeks an incumbent who possesses the following:

Required Qualifications

  • Bachelor’s degree in Mechanical, Chemical, Environmental, Process Engineering, or a related discipline;
  • Typically 10 or more years of relevant utility, industrial-treatment, or regulated-manufacturing engineering experience;
  • Demonstrated leadership of engineering, commissioning, and start-up for major utility or environmental-infrastructure projects;
  • Broad experience across central utilities and treatment systems, with demonstrated ability to lead specialist engineers;
  • Strong understanding of equipment integration, utility reliability, process safety, environmental-performance requirements, and applicable GMP utility qualification;
  • Proven multidisciplinary leadership, supplier management, troubleshooting, cost management, and communication skills;
  • Fluent English required.

PREFERRED QUALIFICATIONS

  • Bachelor’s degree in Mechanical, Chemical, Environmental, Process Engineering, or a related discipline; advanced degree preferred.

Employees can expect to be paid a salary between $131,600.00 to $197,400.00.  Additional compensation may include a bonus or incentive compensation (if relevant).  Additional benefits include health care, vision, dental, retirement, PTO, sick leave, etc.. 

This salary range is merely an estimate and may vary based on an applicant’s location, market data/ranges, an applicant’s skills and prior relevant experience, certain degrees and certifications, and other relevant factors.

This posting will be available for application until at least 11-16-26.

 

#LI

#LI-AMS

バイエルは、競争力のある多様な報酬・福利厚生プログラムを提供しています。この特別なオポチュニティの要件を満たし、当社のミッション「すべての人に健康を、飢餓をゼロに」に貢献したい方は、ぜひご応募ください。より大きな挑戦の一員に。自分らしく。Be Bayer.


人材紹介会社の皆さまへ:バイエルは、依頼していない第三者からの履歴書を受け付けていません。

バイエルは、雇用機会均等を推進する雇用主です(障がい者・退役軍人を含む)。

バイエルは、障がいのある方が応募プロセスを利用できるよう、合理的配慮の提供に取り組んでいます。必要な配慮がある場合は、以下の連絡先からお申し出ください。

雇用機会均等に関する声明:米国からアクセスされる方へのお知らせ:本サイトのすべての情報には、米国大統領令を含め、時期や地域によって異なる現地の規則・規制が適用されます。

バイエルはE-Verify参加企業です。

お問い合わせ先:

メール: hrop_usa@bayer.com

Benefits

Medical, Dental & Vision Coverage

Comprehensive health benefits including prescription coverage, telemedicine, mental health, and family care

Paid Time Off

30+ days of vacation and holidays per year

Retirement Planning

Top-tier 401K with up to 10% company contributions

Paid Parental Leave

Paid time off for the adoption, birth, or placement of a child

Employee Life Insurance

Life insurance coverage for employees, a spouse/domestic partner, and children

Employee Share Purchase Plan

Align your success with Bayer’s as a shareholder

求人の詳細

カテゴリ

Engineering, Science & Technology

掲載日

Photo of a Bayer office located in the United States

場所

2447 North Star Road, Columbus OH 43221, United States

ジョブID

JR10000309

給与範囲

他の同様の求人

微笑むバイエル従業員

応募方法

チャットで応募 通常の応募

詳しく見る: 動画を見る